Raychem QuickStat Installation Manual download pdf (Page 1)

QuickStat

™

Thermostat

Installation & Operation Manual

General Information

Use of this Manual

This manual covers the installation and operation of the Raychem

QuickStat

™

thermostat and must be used with the following document:

•

QuickNet

™

System Installation Manual

(H57704)

Important:

For the Tyco Thermal Controls warranty and agency

approvals to apply, the instructions included in this manual and product

packages must be followed.

Features

QuickStat is an electronic thermostat that must be used with the

Raychem QuickNet floor warming mats.

QuickStat provides the following features:

• Includes an integrated Class A, Ground-fault Circuit Interrupter (GFCI).

• Operates at 120/240 V 50/60 Hz.

• Switches on your heating system at predetermined times on different

days of the week.

• Offers 4 periods (called events) each day that you can set at different

temperatures.

• Comes with a preprogrammed schedule that is suitable for most

installations. However, you can customize this program any time you

wish.

• Allows you to reset the thermostat to factory settings.

• Changes the start time of a heating period automatically so that the

desired temperature is reached at the time that you set.

• Controls the temperature of the floor through a temperature sensor

that is placed in the floor construction.

Specifications

Approvals

Technical Data

Supply Voltage 120/240 V ±15%, 50/60 Hz

Maximum switching current 16 A

Wiring 12 AWG to 22 AWG

GFCI Class A (5 mA trip level)

Temperature control range 40 to 104˚F (5 to 40°C)

Ambient temperature range

Thermostat 32 to 104˚F (0 to 40°C)

GFCI –31 to 149˚F (–35 to 65°C)

LISTED

2D03

E157297

Kit contents

A 1 QuickStat thermostat

B 2 Mounting screws

C 1 Floor temperature sensor 10 ft (3m)

1 2 3 4 5 6 ... 11 12

Summary of Contents

Page 1 - Thermostat

QuickStat™ThermostatInstallation & Operation ManualGeneral InformationUse of this ManualThis manual covers the installation and operation of the R

Page 2 - Installation

Utilisation quotidienne du thermostatMode horloge 4 événementsChaque jour est divisé en 4 événements préréglés. Si le thermostat esten mode 4 événemen

Page 3 - Initializing the Thermostat

Réglages et affichages avancés Appuyez sur les deux boutons PLUS ( ) et MOINS ( )pendant 3 secondes : l’afficheur indique « INFO ».Appuyez sur le bout

Page 4 - Daily Use of the Thermostat

Vérification de la sonde de températureSi la sonde est déconnectée ou en court-circuit, le système de chauffagene fonctionnera pas. L’état de la sonde

Page 5

InstallationImportant:This thermostat must be installed according to all nationaland local electrical codes. The installation must be performed by qua

Page 6 - Error Codes

Initializing the ThermostatSetting the thermostat into operationThe first time you power up the thermostat, the time and day will flashand must be set

Page 7

Daily Use of the Thermostat4-event clock modeEach day has been split into 4 events describing a typical day. When thethermostat is in 4-event mode it

Page 8

Advanced Settings and Read-Out Press both the UP ( ) and DOWN ( ) buttons togetherfor 3 seconds. "INFO" is displayed.Press the UP ( ) button

Page 9 - Mode adaptatif

Sensor TestingIf the sensor is disconnected or short-circuited, the heating system isturned off. Test your sensor according to the following resistanc

Page 10 - Programmation

Instructions d’installation et d’opération du thermostatQuickStat™Information généraleUtilisation de ce manuelCe manuel couvre l’installation et l’uti

Page 11 - Temperature sensor

8InstallationImportant:L’installation de ce thermostat doit être conforme aux codesde l’électricité national et local. Elle doit être faite par un tec

Page 12

9Initialisation du thermostatAvant la mise en service du thermostatLorsque vous branchez le thermostat, l’heure et le jour clignotent pourvous rappele